Skip to Content

Yamato AWD Series Glassware Washer

Process monitorable laboratory glassware washers

$ 1.00 $ 1.00

Not Available For Sale

  • Model

Please contact our team for help with this particular configuration here. Our expert team will respond to you very promptly.

Contact Us
https://www.yamato-usa.com/web/image/product.template/14370/image_1920?unique=1a4805a

AWD510/510DRY


Features

  • Front-panel LED and internal lighting show progress at a glance
  • Rinsing can be done at any temperature setting up to 93°C.
  • Sliding two-stage rack allows cleaning more glassware in a single cycle
  • A large double glass window provides a clear view of the interior
  • Double-glazed window ensures that the surface does not get hot even during hot water disinfection
  • Rotating nozzle showers at the top, middle and bottom allow for thorough and even cleaning
  • Electronic lock prevents the door from being accidentally opened during cleaning
  • A wide range of optional racks is available to match different cleaning needs
40 years as a leading scientific lab equipment provider in the United States.
All products come with a 1 year warranty.
Every product is made through environmentally conscious methods and remains eco-friendly all throughout its life cycle.
Model AWD-510 AWD-510DRY
Type Upper / middle / lower stage pressure jet type rotary jet nozzle
Objects to be washed Glassware as a whole including test tubes, flasks, beakers (excluding pipet)
Detergent Liquid detergent/supplied by automatic supply unit
Powder detergent/manually supplied during operation
Performance Operation panel Touch panel 4.3 inch LCD
Washing program Pre-wash -> wash -> rinse -> final wash Pre-wash -> wash -> rinse -> final wash -> pre-drying
Arbitrary selection of the
process		 Washing temperature setting: OFF, pre-wash and wash: 45~80°C, rinse and final wash: 45~93°C Washing temperature setting: OFF, pre-wash and wash: 45~80°C, rinse and final wash: 45~93°C, pre-drying: fixed at about 60°C
Washing time 1~60 minutes (~10 minutes for 90°C or more), Wait,
Repeat count:1~10 		1~60 minutes (~10 minutes for 90°C or more), Wait,
Repeat count:1~10, Pre-drying process: Time setting: 1~360 min, Wait OFF, Repeat count: 1
Program Nine patters of above program can be stored
Process display Operation panel LED ON for each process pre-wash, wash, rinse, final wash, predrying: green
Lighting color inside the bath: Pre-wash [green], wash [yellow], rinse [blue], final wash [light blue], predrying [purple]
Maximum washing
volume		 With two stages: Upper stage 10kg (effective height 150mm), lower stage 15kg (effective height 165mm)
With one stage: Lower stage 15kg (effective height 300mm) with optional one-stage rack used
Installation Ambient environment Operating ambient temperature: 5~40°C, Humidity 65±20%RH (no dewing), Elevation: 1500m or less above sea level
Water supply conditions Tap water (mandatory): G3/4 connections (G1/2 on the equipment side), flow 10L/min or more, temperature: 5~25°C
Feed water pressure: 0.1~0.5MPa
Hot water (optional): G3/4 connection port (G1/2 on the equipment side), flow 10L/min or more, temperature: 5~60°C
Feed water pressure: 0.1~0.5MPa
Pure water (optional): φ10.5mm connection port, gravity water supply, temperature: 5~60°C
Feed water pressure: 0.02~0.1MPa
Feedwater rate: 11L
Draining Temperature: 60°C or less, φ31.5mm connection port,on the equipment side: nominal 40 (40A) piping
Forced drain with pump
Overflow Connection port 13mm
Composition Legs Level adjuster (M10 screw)
Exterior Overall dimensions: W580×D600×H845mm (excluding protrusions)
Side/top surfaces: SUS304 hairline,bottom plate/backside: SUS304 2B
Front panel (front below): SPCC
Door Front loading type (damper mechanism)
Double glass inside structure (heat-resistant reinforced),Outside: Polycarbonate
Operation panel (door upper portion); ABS Resin
Inner tank Washing tank dimensions: W500×D480×H480mm (excluding protrusions), material: SUS316
Rotary nozzle shower type, internal filter 10 mesh, water tank filter 40 mesh, heater 2kW
Bathy internal temperature sensor (Pt100)
Pre-drying unit Heater 700W, hot air drying with external air introduced via HEPA
Heat insulation material Melamine resin
Main power switch Leakage breaker function with overcurrent (provided in the front panel (lower front))
Standby power switch Tact switch (provided in the right side of panel)
Steam cooling function Reduction of the steam amount due to steam cooling
Controller Calendar function (battery backup), set memory function
Safety device Interlock, overcurrent/sensitivity current, door lock, overtemperature prevention, water full detection, circulation water pressure drop detection, leakage detection, prevention of water overtemperature
Standard No. of rack stages 2 or 1 (option)
Power supply Single phase AC220V 13A (breaker capacity 15A), Power cord: 3m, 3 wires. Round terminal for M5
Internal dimension 500×480×480 mm (WxDxH)
External dimension 580×600×845 mm (WxDxH)
Weight Dry weight 87kg (excluding racks and circulation water)
Accessories Water supply hose [20A(G3/4) female - 15A(G1/2) female] 1.5m (2 pieces), Drain hose (inside dia. 31×2m), Detergent bottle housing rack, detergent tube, operation manual, cover to be used after removal of upper rack, overflow hose (inside dia. φ12×1.5m), upper and lower rotation nozzles

*The performance is under conditions of power supply of AC220V, room temperature of 23°C ± 5°C, the humidity of 65 RH±20% 

* The performance range is for the raw water pressure at 0.1 0.5MPa and water temperature at 20 °C The water sampling rate differs depending on fluctuation of the water temperature.

Click on the links below to download the associated PDFs.

 AWD Series Glassware Washer

To download Operational Manual, visit our Technical Support Center​