| |
DL410 |
| Performance and Structure |
| Water evaporation rate |
Max. approx. 3,000 ml/h |
| Spraying system |
Two-liquid nozzle system
(Dia. of orifice : 0.7mm) |
| Spray/hot air contact system |
Downward spray parallel
flow system |
| Sample liquid feed pump |
Quantitative peristaltic
pump, flow rate variable up to 80ml/h. |
| Aspirator |
Bypass-type commutator blower,
air flow rate variable up to 1m3/min. |
| Temperature control |
Temperature control by thyristor,
temperature control range : 40°C to 300°C |
| Heating source |
Stainless steel pipe heater
(2.0kW×2pcs.) |
| Drying chamber dimensions (mm) |
450 (Dia.)×1,000 (H)
(Glass part) |
| Material |
Drying chamber, cyclone,
product vessel : Super hard borosilicate glass (other tubes
are made of stainless steel and silicone rubber hose) |
| Additional operating features of the nozzle |
Automatic orifice clean
out (needle knocker),
clean out of any powder adhered to the tip (nozzle blower) |
| Additional operating features of the body |
Automatic raising and lowering of the head
(for washing of the drying chamber and hot air blower)
|
| Instrumentation |
Control function : Inlet
temperature, hot air flow, sample pump feed quantity, atomizing
air pressure, orifice clean out time.
Meter : Temperature recorder of inlet and outlet temperatures,
dry air flow meter, atomizing air pressure gauge. |
| Standard |
| Power source (50/60Hz) |
AC 200/220V, single phase,
25A/23A |
| External dimensions (W×D×Hmm) |
1,060×880×1,750 |
| Weight |
Approx. 180kg |
| Accessories |
| Pump tube |
6.4(O.D.)mm×3.2(l.D.)mm
x 2(L)m 2pcs. |
| Air hose |
7.9(l.D.)mm×3(L)m
1pc. |
| Exhaust duct |
50(l.D.)mm×3(L)m 1pc. |
Laboratory
Spray Dryer series DL410
Control
Panel
