 Spray
Dryer ADL311/311S |
Home > Products > ADL311/311S |
| Evaporated
water |
| Max. 1,300 mL/h |
|
| Temp.
adjustment range |
| 40 to 220deg.C |
|
| Sample
flow |
| Variable up to 26 mL/min. |
|
| Spray
nozzle (selectable) |
| For liquid/gas |
|
| Easily grinds
sample into fine powder with the spray drying system |
ADL311-A:
Model dedicated for water soluble sample
ADL311S-A:
Model supporting water soluble and organic solvents*
(*When organic solvent is used, a GAS410 type organic solvent recovery
unit will be necessary.)
- Because this product applies heat on fine grain sample instantly
and does not apply high temperature on dry fine powder sample
itself, samples unstable to heat can be reliably changed into
even fine powder.
- Prepared fine powder will not be oxidized and contains minimum
water and is contamination-free.
- Drying is made directly from solution or suspension liquid
sample into fine powder, which does not need pre- or post processes
such as filtration, separation, or pulverization necessary in
the conventional drying method and can be used without concern
of contamination during a series of operations.
- Model ADL311S-A is available to support organic solvent by
connecting ADL311-A dedicated for water soluble samples and GAS410
solvent recovery unit to the standard model ADL.
- Employment of a one-touch detachable mechanism in the drying
chamber and the cyclone further improves ease of operation.
- An arm jack is equipped as standard for useful installation
and removal of attachments.
- A service outlet (max.2A) and a sample stand are equipped as
standard for connecting a magnetic mixer for stirring suspended
liquid sample.
- Employment of a unique peristaltic pump, nozzle cooling mechanism,
pulse jet mechanism, and a nozzle knocker realize stable spray
drying.
- Global product lineup with multi-language multiple power supply
and touch panels in Japanese, English, and Chinese. .
|
 Specifications |
| Model |
ADL311-A |
ADL311S-A |
| Supported samples |
Water soluble samples |
Water soluble and organic solvent |
| Performance |
Evaporated water amount |
Max. 1300 mL/h |
| Temp. adjusting unit setting range |
40 to 220deg.C (inlet
temperature), 0 to 60deg.C (outlet temperature) |
| Temperature adjusting accuracy |
Inlet temperature±1deg.C |
| Drying air amount adjusting range |
0 to 0.7 m3/min |
| Spray air pressure adjusting range |
0 to 0.3 MPa |
| Liquid sending pump flow rate range |
0 to 26 mL/min |
| Configuration |
Spray air line washing function |
Spraying at the nozzle
tip, manual pulse jet system |
| External output |
Inlet temperature,
outlet temperature, temperature outlet (4-20 mA) |
| Temperature adjusting device |
PID digital temperature
adjusting device |
| Touch panel |
Blower, heater, liquid
sending pump, pulse jet switch, error display |
| Control select switch |
Inlet temperature, outlet
temperature control switch (Outlet temp. control is conditional.) |
| Temperature sensor |
K-thermocouple |
| Heater |
2.0 kW (at 200V) to
2.88 kW (at 240V) |
| Liquid sending pump |
Fixed amount peristaltic
pump |
| Spraying air pump |
Spraying air compressor (sold separately)
is used. |
Spraying air compressor (sold separately)
is used.GAS410 integrated compressor is used when GAS410 is connected. |
| Service outlet |
For stirrer: AC100V,
MAX2A |
| Suction blower |
Bypass blower |
| Filter |
Suction filter, exhaust
filter |
| Recovery of solvent |
- |
Solvent recovery unit GAS410 (sold
separately) is used. |
| Spray nozzle cooling mechanism |
Connector: nipple x
2, O.D.:φ10.5 mm |
| Spray air connection diameter |
Nipple diameter:φ7
mm |
| Spray air pressure |
Bourdon tube: 0.3 MPa |
| Exhaust connecting diameter |
φ50 mm |
| Safety function |
Inlet/outlet temperature
overheat, sample feed reverse rotation mechanism, over current electric
leakage breaker, nozzle connection error |
| Standards |
External size |
W580 x D420 x H1,125
mm |
| Weight |
80 kg |
| Power supply (50/60 Hz) rated current |
AC200V 16A (20A)(AC220V
17A, AC240V 18A *Switching of terminals necessary) |
| Accessories |
Silicon tubes (with
a stopper) x 3, exhaust duct (with one hose band) x 1, outlet temperature
sensor, spray air tube, sample box, static electricity removal earth, "Tetron" braided
tube hose 5m (with two hose bands) |
| Control
panel |
Example
of installation |
 |
 ADL311S-A
+ GAS410 + stand with caster wheels (optional) |
| Piping |
|
ALD311S-A+GAS410 |
|
Applications
- Food and medicinal products Powder milk, egg york, soy
sauce, coffee, starch, protein, hormone, serum, antibiotics,
enzymes, fragrant materials, essences, etc.
- Organic chemistry Wax, die, cleaning agent, surface acting
agent, agricultural chemical, antiseptic agent, synthesized
resin, pigments, etc.
- Inorganic chemistry Ferrite, ceramics, photocopy toner,
magnetic tape materials, photosensitive materials, various
industrial chemicals, waste fluid of samples, etc.
|
|
| System
diagram |
 |
| No. |
Part name |
No. |
Part name |
| (1) |
Heater |
(9) |
Blower |
| (2) |
Inlet temperature sensor |
(10) |
Solenoid valve |
| (3) |
Distributor |
(11) |
3-way solenoid valve (ADL311S
only) |
| (4) |
Drying chamber |
(12) |
Needle valve |
| (5) |
Cap |
(13) |
Pressure meter |
| (6) |
Outlet temperature sensor |
(14) |
Spray nozzle |
| (7) |
Cyclone |
(15) |
Liquid sending pump |
| (8) |
Product collecting container |
(16) |
Nozzle cooling mechanism connecting
port |
|
| Spray
nozzle |
 The
tip of the nozzle comprises of a nozzle for liquid and a nozzle for
gas. |
| Product code |
Model |
Nozzle No. |
Size (μm) |
| 281297 |
1A
(standard) |
（F）1650 |
A 406
B 1270 |
| （A）64 |
C 1626 |
| 281298 |
1 |
（F）2050 |
A 508
B 1270 |
| （A）64 |
C 1626 |
| 281290 |
2A |
（F）2050 |
A 508
B 1270 |
| （A）70 |
C 1778 |
| 281291 |
2 |
（F）2850 |
A 711
B 1270 |
| （A）70 |
C 1778 |
| 281292 |
3 |
（F）2850 |
A 711
B 1270 |
| （A）64 |
C 1626 |
|
 |
| Example
of installation (spray dryer ADL311-A) |
| Sample name |
Composition
（％） |
Inlet temp.
（deg.C） |
Outlet temp.
（deg.C） |
Dry air amount
（m3/min） |
Spray air pressure
MPa |
Sent amount
of sample liquid
（g/min） |
Sample recovery
rate
（％） |
| Dextrin (solution) |
10 |
150 |
80 |
0.4 |
0.1 |
6.1 |
66 |
| Dextrin (emulsion) |
40 |
150 |
80 |
0.4 |
0.1 |
5.1 |
63 |
| Oxidized titanium (suspended
liquid) |
10 |
150 |
85 |
0.42 |
0.1 |
5.3 |
50 |
| Soy sauce |
50 |
130 |
75 |
0.36 |
0.1 |
5.1 |
60 |
| Salt |
10 |
145 |
85 |
0.38 |
0.1 |
5.3 |
52 |
|
| |
| Repeatability
of spray drying test (spray dryer ADL311-A) |
Test
No. |
Sample
name |
Sample
density
（％） |
Drying
conditions |
Yield |
Recovery rate |
Inlet temp.
（deg.C） |
Outlet temp.
（deg.C） |
Dry air
amount
（m3/min） |
Spray air
pressure
MPa |
Test sample
amount
（g/min） |
Sent amount of
sample liquid
（g/min） |
Test time
（min） |
（g） |
（％） |
| 1 |
Coffee solution |
5.00 |
150 |
75 |
0.45 |
0.15 |
93.1 |
3.1 |
30 |
4.3 |
92.4 |
| 2 |
Coffee solution |
5.00 |
150 |
75 |
0.45 |
0.15 |
93 |
3.1 |
30 |
4 |
86 |
| 3 |
Coffee solution |
5.00 |
150 |
75 |
0.45 |
0.15 |
91.4 |
2 |
30 |
4 |
87.5 |
| 4 |
Coffee solution |
5.00 |
150 |
75 |
0.45 |
0.15 |
84.9 |
2.8 |
30 |
3.7 |
87.2 |
| 5 |
Coffee solution |
5.00 |
150 |
75 |
0.45 |
0.15 |
83.8 |
2.8 |
30 |
3.7 |
88.3 |
|
| Optional
parts |
| Product name |
Product code |
| * Caster stand |
212783 |
| Fine powder recovery cyclone |
212780 |
| Safety cover |
212784 |
| * Dry air flow meter (voltage
system) |
212793 |
| * Inlet/outlet temperature
recorder (3-dot) |
212792 |
| Static removal brush set |
212788 |
| Viton packing for cyclone
inlet/outlet (1 set of 2 types) |
212781 |
| Teflon packing for cyclone
inlet/outlet (1 set of 2 types) |
212782 |
| Regulator |
212789 |
| Supply air filter box (for
0.3 micro meter collection) |
212790 |
|
Note : The item marked " * " in the column
of "Remark" shall be ordered together with the main unit.
●The pressurizing unit for the unit shall be a unit with a
pressure reducing valve of blow air amount of 25 L/min or more and
be stable at a discharge pressure of 0 to 294 kPa (3 kg/cm2).
Recommended product: Hitachi silent air compressor SC-820 (pressure
reducing valve included).
|
| CONTACT
US Toll free 1-800-2-YAMATO/ E-mail: customerservice@yamato-usa.com |
|
