DP63HP

Site Map | Contact Us

Vacuum Drying Oven DP63HP

Home > Products > DP63HP

Model

DP63HP

Operating Temperature Range

40 deg.C to 210 deg.C

Temp. uniformity

100 to 0.1 kPa

Internal Capacity (L)

216

High precision oven that controls temperature for each of shelves

This product is a vacuum drying oven that separately controls temperature of a shelf with a heater (eight steps).

Temp. uniformity has been improved to 210 deg.C+/-4 deg.C.
Since the vacuum pump can be stored in the unit, space can be effectively utilized.
The unit employs a highly reliable and easily connectable quick coupling system.
A silicon-free product that employs Viton (R) fluoroelastomer for its door packing.
Easy removal of pipes allows easy maintenance of the vacuum pump.
Interactive key entry on the control panel allows every one to make settings easily. The temperature in the unit during operation is displayed with a bright LED.
Standard functions include program operation and other high precision functions.
Improved safety functions include the self diagnostic function, the automatic overheat prevention function, and the key lock function.

Control Panel

Internal bath	Temperature controller for shelves

Specifications

Model	DP63HP
System	Pressure reduction and shelf heater
Performance
Operating temp. range	Room temp. + 5 to 210 deg. C
Operating pressure range	101 to 0.1 kPa
Configuration
Internal/external material	SUS304 cold rolled steel plate Melamine resin finishing
Door	Single swing type (left)
Door packing	Viton packing
Heat insulator	Rock wool
Heating system	Shelf heating
Operation function Heater control	Fixed operation, auto start operation, auto stop operation, program operation (up to 16 segments) Separate control of each shelf: Triac zero cross system
Function
Other additional functions	Temperature recorder (video chart recorder-9 channels), Pirani gauge, signal tower, large buzzer, heat treatment timer
Safety functions	Self diagnostic function (temp. sensor error, heater disconnection, SSR short-circuit, automatic overheat prevention), key lock, independent overheat prevention, over current electric leakage breaker
Standards
Internal dimensions	600 x 600 x 600 mm (W/D/H)
External dimensions	1,020 x 820 x 1,650 mm (W/D/H)
Power supply	Three phase 200V, 50/60 Hz, 37A
Shelf specifications	Pipe heater 0.9 kW x 8 steps, 7.2 kW
Shelf size	590 x 550 x 25 mm (W/D/T)

The performance shown here is the value under the condition of the ambient temperature of 23°C±5°C, humidity of 65%RH±20%.
The projection is not included for Internal dimensions and External dimensions.


	Copyright© Yamato Scientific America Inc. all rights reserved.