High cost performance forced convection oven, fixed type.

A forced convection, constant temperature oven incorporating simple operation functions and a wide range of other function, and boasting enhanced safety features and operability.

• Fixed setting, Quick Auto stop, Auto stop, and Auto start operating modes are possible, along with easy control capabilities.
• Settings can be made digitally using the dedicated operation menu keys or the keys.
• Over-heating prevention, calibration offsetting and key-lock are possible through the auxiliary functions.
• Comprehensive safety features.

	DKM400	DKM600
Performance
Circulation method	Forced air circulation
Operating temperature range	Room temp.+10 to 260°C (no load at ambient temparature of 23°C)
Temp. control accuracy Temp. distribution accuracy	±1.0°C(at 210°C: exhaust port closed) ±2.5°C(at 210°C: exhaust port closed)
Max. temp. reaching time	Approx. 90 min. (room temperature to 260°C)
Components
Interior material Exterior material	Type 304 Stainless steel Cold rolled steel plate with melamine resin baking finish
Heat insulating material	Glass wool
Heater	SUS pipe heater
	1.2 kW	1.34 kW
Fan type	Scirocco fan, Condenser type
Motor	10 W
Exhaust port/Cable port	30 mm l.D.×2 pcs.(the top) /30 mm l.D.×1 pc.(right side)
Controller
Temp. controller	PlD control for heater output by microcomputer
Temp. setting method	Operation menu key and digital setting by key
Temp display method	Measurement temp. : Digital display by green LED Setting temp. : Digital display by red LED
Timer	1 min. to 99 Hrs. 59 min. and 100 Hrs. to 999 Hrs. 50 min.
Min. division	1 min. or 1 Hrs.
Operation function	Fixed temperature operation, Auto start, Quick Auto-stop operation
Additional functions	Calibration off-set function, Key lock, Uninterruptible power for memory
Heater circuit control	SSR control
Sensor	K-thermocouple
Safe Device
Safety countermeasures	Temperature sensor error, Temperature input circuit error, Auto overheat prevention, Measured temperature error, Circuit breaker, Hydraulic standalone overheat prevention device
Standard
Internal dimensions (W×D×Hmm) External dimensions(W×D×Hmm) Internal capacity	450×450×450 560×601×820 90 L	600×500×500 710×651×870 150 L
Shelf plate with standard load	Approx. 15 kg/piece
Shelf rest step number	9 steps	12 steps
Shelf rest pitch	30 mm
Power source 50/60Hz	115V, single phase, 11 A	115V, single phase, 12A
weight	Approx. 50 kg	Approx. 65 kg
Accessories
Shelf plate	Stainless steel, 2 pcs.
Shelf bracket	4 pcs.
Optional Accessories
Stand / Fitting for stacking / Additional shelf plate / Cable hole(25/50mm) / External communication terminal / Temp. output terminal (4 to 20mA) / Time up out-put terminal / Out-put terminal for alarm device / Independent overheating prevention etc.

• The performance shown here is the value under the condition of the ambient temperature of ±5°C to 35 °C, humidity of 65%RH±20%.
• The projection is not included for Internal dimensions and External dimensions.