 Spray Dryer ADL310 |
Home > Products > ADL310 |
| Water Evaporation |
| Max.1300 ml/h |
| Operating Temperature Range |
| 40°C to 200°C |
| Liquid Sample Flux |
| up to 28 ml/min. |
| Spraying Nozzle |
| for Liquid and Air |
|
The ADL310 is a compact spray dryer using a spray dry method which enables simple use experiments.
- No danger of damaging foodstuffs, medical products and products that are
sensitive to biochemical-heat.
- No oxidation takes place and the water content of the formed powders is low,
so that there is no contamination.
- Even a solid body of ca.0.5g can be dried.
|
 Specifications |
| |
ADL310 |
Performance |
| Water evaporation rate |
Max. approx. 1,300 ml/h |
| Temperature control range |
40 to 200°C |
| Temperature control accuracy |
±1°C |
| Dry air flow rate |
Max. 0.7 m3/min. |
| Flow rate for Sample liquid feed pump |
Max. 28 ml/min. |
| Structure |
| Temperature controller |
PID Digital temp. controller |
| Heater |
2 kW |
| Aspirator |
Bypass-type blower |
| Sample liquid feed pump |
Quantitative peristaltic pump |
| Spray pressure gauge |
Bourdon tube pressure gauge, measurement range : 0 to 0.3MPa (0 to 3kg/cm2) |
| Spray nozzle |
Two-liquid nozzle, 1A |
| Safety Device |
| |
Self diagnosis functions (Temp. abnormal), Sample feed reversion system,
Nozzle orifice cleaning(Pulse jet system, Manual) |
| Standard |
| Power source (50/60Hz) |
AC 200/220V, single phase
16.5A/15A |
| External dimensions(W×D×Hmm) |
580×420×1,075 |
| Weight |
Approx. 78kg |
| Accessories |
| Sample liquid tube |
Silicone tube 2 pcs. |
| Optional Accessories |
| Drying air flow meter / Temp. recorder for inlet and outlet temp. |
|
| CONTACT US Toll free 1-800-2-YAMATO/ E-mail: customerservice@yamato-usa.com |
|
Inlet temperature, outlet temperature and drying air volume are displayed digitally. Condition setting dials and stage level control switch are located on the front panel for easy use.
